Nanoskin AutoScrub Fine Grade Clay Pad

NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology | which replaces the use of clay bars. It safely and easily removes paint over spray | water spots | fresh tree sap | rail dust and other bonded surface contaminants from the surface of automotive paint | glass | moldings and plastic. Unlike the clay bar | the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground | no worries | just rinse the sponge pad clean and you’re ready to keep using it. Easy glides allows for sturdy and controlled handling | unlike clay bars where constant reshaping is required.

NOTE:

• Sufficient lubrication is crucial to the AUTOSCRUB application.
• Plain water is NOT an adequate lubricant.
• AUTOSCRUB is not solvent resistant.
• Remove tar & grease before application

Helpful Tips:

• The AUTOSCRUB has a protective coating to ensure stability within transportation.
• To break in the pad | moisten the AUTOSCRUB with desired lubricant.
• Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don ‘t use until the polymerized rubber is soft and slightly tacky.
• Cold temperatures may stiffen pad. Warm surface before using.
• There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

Directions For Use:

• Use ONLY on clean | cool paint and out of direct sunlight. DO NOT work on the surface below 55 °F and over 144 °F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
• Thoroughly wash vehicle free of dust | sand | and dirt.
• Mist sufficient clay lubricant onto the surface evenly.
• Work the surface with a dual action orbital polisher (Low Speed) using light pressure or by hand with Hand Strap Applicator (AS-007) using light pressure.
• Wipe off residue with clean dry microfiber towel.